Sign In | Join Free | My himfr.com
Home > Belt Filter Press >

Vacuum Belt Filter Press For Wastewater Treatment Mining

    Buy cheap Vacuum Belt Filter Press For Wastewater Treatment Mining from wholesalers
     
    Buy cheap Vacuum Belt Filter Press For Wastewater Treatment Mining from wholesalers
    • Buy cheap Vacuum Belt Filter Press For Wastewater Treatment Mining from wholesalers

    Vacuum Belt Filter Press For Wastewater Treatment Mining

    Ask Lasest Price
    Brand Name : ZR
    Model Number : ZR
    Payment Terms : T/T
    Supply Ability : 1000PCS/Year
    Delivery Time : 20-30 days
    Price : Price Negotiable
    • Product Details
    • Company Profile

    Vacuum Belt Filter Press For Wastewater Treatment Mining

    ZR3500P8L Large Capacity Belt Filter Press


    Technical Parameters

    Model: ZR3500P8L

    Belt width: 3500mm

    Mud processingcapacity: 50-60t/h

    Filter cakeproduction: 15-17t/h

    Sediment percentage: 75-85%

    Total power: 33kw


    Model technical parameters

    ModelBelt width
    (mm)

    Mud Processing
    capacity

    (Ton/H)
    Filter cake
    production

    (Ton/H)
    Sediment
    percentage

    (%)
    Total Power of
    equipment

    (KW)
    Total power
    (KW)
    Dimensions
    L*W*H(MM)
    Weight
    (KG)
    Zr-1000P8L100010-162-375-853105500*2000*21004500
    Zr-1500P8L150015-254-575-854135800*2400*22006500
    Zr-2000P8L200025-356-775-855.5177500*2900*23007600
    Zr-2500P8L250030-401075-855.5177800*3200*25009200
    Zr-3000P8L300040-5012-1575-85113312500*3500*250014500
    Zr-3500P8L350050-6015-1775-85113313000*14000*250015500


    Details

    1.Bearing and pedestal
    In order to prevent corrosion, all bearings and pedestals adopt a double V-ring seal, Apply nodular cast iron to produce the pedestals. The machine adopts double row centering roller bearing to realize large load-bearing capacity and long service life.

    2. Filtrate collecting device
    In order to prevent leakage and splashing of flushing water and filtrate, all flushing water and filtrate are collected through the drip tray, and they can be discharged intensively or separately.

    3. Protective device
    The safety protection net and warning sign are set on both sides of the machine. The fault emergency response system composed of the electric control limit wire switch; it can monitor all actions in the adjustment process of the filter belt. The limit switch triggers and shuts down when the adjustment system produces excessive deviation in the centering process.

    4. Centralized electric control cabinet
    The whole sludge dewatering system is controlled by a set of distribution control cabinets (manual contact control or PLC controller). The electronic control cabinet provides power supply, start-up, stop protection, and alarm (save from short circuit, overheating, overload, and phase deficiency control) for the main engine and its supporting equipment - sludge pump, cleaning pump, mixer, liquid pump, air compressor, and conveyor, etc.


    Belt Press Filter Working Principle

    The raw material, passing through the distributor, is pre-pressed and dehydrated in the wedge area, and then further squeezed and dehydrated in the large area low pressure drainage area composed of porous drainage rollers. Then, the raw material with a certain degree of dryness is pressed by three sets of high-intensity squeezing, i.e. roller I, roller II and roller III. Then the raw material with extremely low water content is pressed and dehydrated again by the mesh belt at the discharge port. Finally the dry filter cake is discharged. It basically meets the requirements of major varieties for moisture content, and the entire process is subject to extrusion and shear forces.

    Application



    Quality Vacuum Belt Filter Press For Wastewater Treatment Mining for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai ZhongRui environmental protection equipment Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)